AT-ME19 · Automation
Automated Guided Vehicle for Factories
A cart follows a marked path to carry material between stations and stops for obstacles.
- Suits
- Sem 7–8
- Branches
- Mechatronics, ECE
- Type
- Hardware model
How it works
IR sensors under the cart follow a line marked on the floor from one station to the next. Markers at each station tell the controller to stop there for loading or unloading before moving on. A sensor at the front stops the cart if a person or object is in its path and lets it continue when the path is clear.
What it does
- Path following
- Station stops
- Load platform
Main parts
Controller, IR sensors, geared motors
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-EL12Smart Water Pump ControllerRuns the pump by tank level and cuts it off if the sump is dry, to protect the motor.
- AT-EC28Smart Ration Dispensing SystemIdentifies the card holder and dispenses the exact quantity of grain, with every issue recorded.
- AT-EE15Smart Home Energy ManagementControl appliances, track their energy use and set schedules from a phone.
- AT-EE17Smart Street Light with Fault DetectionLights switch on at night, dim when the road is empty and report a failed lamp.