AT-ME12 · Automation
Coin-Operated Water Dispenser
Insert a coin and a fixed quantity of water is dispensed.
- Suits
- Sem 5–6
- Branches
- Mechatronics, ECE
- Type
- Hardware model
How it works
The coin acceptor checks that the coin is valid and sends a pulse to the controller. The controller then runs the pump for a fixed time that corresponds to the set quantity of water and stops it. A counter keeps the total litres dispensed. Without a valid coin, the pump does not run.
What it does
- Coin sensing
- Measured dispensing
- Litre counter
Main parts
Coin acceptor, pump, controller
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-EL12Smart Water Pump ControllerRuns the pump by tank level and cuts it off if the sump is dry, to protect the motor.
- AT-EC28Smart Ration Dispensing SystemIdentifies the card holder and dispenses the exact quantity of grain, with every issue recorded.
- AT-EE15Smart Home Energy ManagementControl appliances, track their energy use and set schedules from a phone.
- AT-EE17Smart Street Light with Fault DetectionLights switch on at night, dim when the road is empty and report a failed lamp.