AT-FY23 · Safety
Fire Alarm Using Flame Sensor
A flame sensor detects fire nearby and switches on a buzzer and warning light.
- Suits
- Sem 1–4
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
The flame sensor is a photodiode that responds to the infrared light given off by a flame. With no fire, its output stays quiet. When a flame appears within range, the sensor output changes and switches on a transistor, which drives the buzzer and a warning LED. A preset on the sensor board sets how far away a flame can be detected.
What it does
- Flame detection
- Buzzer and LED alert
- Adjustable range
Main parts
Flame sensor, transistor, buzzer
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY07Kitchen Gas Leakage AlarmAn MQ-2 sensor detects LPG in the air and sounds an alarm before the leak becomes dangerous.
- AT-EC12Women Safety Device with GPS and SOSOne press of the button sends the live location and an alert SMS to saved contacts.
- AT-EC13Accident Detection and Alert SystemDetects a crash from impact and tilt and sends the GPS location by SMS.
- AT-FY01Automatic Street Light Using LDRStreet lights on a road model switch on at dusk and off at dawn on their own, so no power is wasted in daylight.