AT-FY11 · Design thinking
LPG Cylinder Gas Level Indicator
A weighing base under the cylinder shows how much gas is left and warns when it is about to run out.
- Suits
- Sem 1–4
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
The cylinder stands on a platform fitted with a load cell, which gives a very small voltage that changes with weight. An HX711 module amplifies this and sends it to the Arduino. Every cylinder has its empty weight printed on it, so the Arduino subtracts that from the reading to get the gas left, and shows it as a percentage on the LCD. A warning comes on when the gas falls below the low level.
What it does
- Gas left in percent
- Low-gas warning
- LCD display
Main parts
Arduino, load cell, HX711, LCD
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY09Pressure Cooker Whistle CounterA sound sensor counts cooker whistles and rings an alarm when the set number is reached, so food is not overcooked.
- AT-FY10Milk Boil-Over AlarmA probe near the rim of the vessel senses rising milk and sounds an alarm before it spills.
- AT-FY12Forgot-Your-Keys Door ReminderIf the door opens while the keys are still on the hook, a buzzer reminds you before you leave.
- AT-FY14Fridge Door Left-Open AlarmAn alarm rings if the fridge door stays open for more than 30 seconds, saving power and food.