AT-EC24 · Robotics
RFID Museum Guide Robot
The robot follows a path, stops at each exhibit when it reads the RFID tag and speaks about it.
- Suits
- Sem 7–8
- Branches
- ECE
- Type
- Hardware model
How it works
The robot follows a line on the floor from one exhibit to the next. An RFID tag is fixed at each exhibit. When the reader on the robot detects a tag, the robot stops and the audio player plays the recorded description for that exhibit, then the tour continues. A front sensor stops the robot if a visitor is in the way.
What it does
- Line-follow tour
- Voice description per exhibit
- Obstacle stop
Main parts
Controller, RFID reader, audio player, chassis
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-BE21Obstacle Avoiding Robot CarThe car drives on its own, scans left and right when something is in front and turns to the clear side.
- AT-BE22Line Follower RobotThe robot follows a black line on the floor around curves and junctions.
- AT-BE23Bluetooth-Controlled CarDrive the car forward, back, left and right from a phone app, with speed control.
- AT-BE24Gesture-Controlled Robot CarTilt your hand forward, back or sideways and the car moves the same way.