AT-EC06 · Vehicle safety
Vehicle Overspeed Alert System
Measures wheel speed and warns the driver when it crosses the limit.
- Suits
- Sem 5–6
- Branches
- ECE, Mechatronics
- Type
- Hardware model
How it works
A magnet is fixed on the wheel and a hall sensor on the frame gives one pulse for every rotation. The Arduino measures the time between pulses and, knowing the wheel size, calculates the speed in km/h for the display. The speed limit can be set with buttons. When the speed goes above it, the buzzer sounds until the vehicle slows down.
What it does
- Speed on display
- Limit setting
- Buzzer warning
Main parts
Arduino, hall sensor, LCD
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY13Bike Side-Stand Warning SystemA buzzer and light warn the rider if the bike starts moving with the side stand still down.
- AT-BE25Alcohol Detection and Engine LockThe engine motor starts only if no alcohol is found in the driver's breath, and locks with an alarm if it is.
- AT-EC05Smart Helmet for Bike SafetyThe bike starts only when the helmet is worn, and an alert goes out if a crash is detected.
- AT-EC07Automatic Braking with Obstacle DetectionA model vehicle slows and stops by itself when an obstacle comes too close.