ATAT Innovation Labs

AT-FY06 · Arduino

Automatic Plant Watering System

A soil moisture sensor switches the pump on when the soil is dry and off when it is wet enough.

Get the cost on WhatsApp

Suits
Sem 1–4
Branches
ECE, EEE, CSE, ISE, AIML, Mechatronics
Type
Hardware model

How it works

The soil moisture sensor has two legs pushed into the soil. Wet soil conducts better than dry soil, so the reading changes with the water content. The Arduino reads this value continuously and shows it on the LCD. When the soil is drier than the set level it switches the relay and the pump waters the plant. When the reading returns to the wet level the pump is switched off, so the plant is never over-watered.

What it does

  • Soil moisture sensing
  • Automatic pump control
  • Moisture level on LCD

Main parts

Arduino, soil moisture sensor, pump, relay

What you get

  • Working model, tested before dispatch
  • Program code and wiring details
  • Rough report and explanation of the working
  • Live demo on video call before the final payment

Good to know

  • This is a table-top demonstration model on low voltage, not a full-size product.
  • Features are as listed here. Anything extra is quoted separately.
  • Shipping is charged at the actual courier rate.
  • Full reports and PPTs are not included.

Similar projects