AT-FY04 · Arduino
Smart Dustbin with Automatic Lid
The lid opens when a hand comes near and closes by itself, so nobody touches a dirty bin.
- Suits
- Sem 1–4
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
An ultrasonic sensor on the front of the bin sends out sound pulses and measures how long the echo takes to return, which gives the distance to whatever is in front. When a hand comes within the set distance, the Arduino turns a servo motor that lifts the lid, waits a few seconds and lowers it again. A second check inside the bin lights an indicator when the waste reaches the top.
What it does
- Touch-free opening
- Adjustable sensing distance
- Bin-full indicator
Main parts
Arduino, ultrasonic sensor, servo motor
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY05Automatic Hand Sanitizer DispenserHold a hand under the nozzle and a small pump gives a measured amount of sanitizer without any contact.
- AT-FY06Automatic Plant Watering SystemA soil moisture sensor switches the pump on when the soil is dry and off when it is wet enough.
- AT-FY08Smart Parking AssistantGreen, yellow and red lights tell the driver how close the car is to the wall, with a buzzer at the stop point.
- AT-FY21Traffic Light ControllerRed, yellow and green lights run in a timed sequence for a junction, with a button for pedestrians to cross.