AT-FY18 · Civil model
Building Tilt and Earthquake Alarm
A sensor on a building model raises an alarm when it shakes or tilts.
- Suits
- 1st year
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
Two sensors are fixed on the building model. The vibration sensor gives a pulse whenever the structure shakes, and the tilt sensor changes state when the building leans beyond a small angle. The Arduino watches both. A light tap is ignored, but shaking above the set sensitivity, or any tilt, switches on the alarm. A knob lets you set how strong the shaking must be.
What it does
- Vibration and tilt sensing
- Loud alarm
- Sensitivity setting
Main parts
Arduino, vibration sensor, tilt sensor, buzzer
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY17Smart Bridge Overload WarningA bridge model sounds an alarm when the weight on it crosses the safe limit.
- AT-FY19Underpass Waterlogging AlertA road model shows a red warning light at the entrance when water rises in the underpass.
- AT-FY20Rainwater Harvesting ModelA house model collects rainwater from the roof into a tank, with lights showing the water level.
- AT-FY01Automatic Street Light Using LDRStreet lights on a road model switch on at dusk and off at dawn on their own, so no power is wasted in daylight.