AT-FY17 · Civil model
Smart Bridge Overload Warning
A bridge model sounds an alarm when the weight on it crosses the safe limit.
- Suits
- 1st year
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
A load cell is fixed under the deck of the bridge model. Any weight placed on the bridge bends the load cell slightly and changes its output, which the HX711 module amplifies for the Arduino. The Arduino converts it to weight and compares it with the safe limit. A green light stays on in the safe range, and a red light and alarm come on when the load is too high.
What it does
- Weight sensing
- Safe and overload lights
- Alarm on overload
Main parts
Arduino, load cell, HX711, LEDs
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY18Building Tilt and Earthquake AlarmA sensor on a building model raises an alarm when it shakes or tilts.
- AT-FY19Underpass Waterlogging AlertA road model shows a red warning light at the entrance when water rises in the underpass.
- AT-FY20Rainwater Harvesting ModelA house model collects rainwater from the roof into a tank, with lights showing the water level.
- AT-FY01Automatic Street Light Using LDRStreet lights on a road model switch on at dusk and off at dawn on their own, so no power is wasted in daylight.