AT-BE19 · Arduino
Bluetooth Home Appliance Control
Switch four appliances on and off from a phone app over Bluetooth.
- Suits
- Sem 3–6
- Branches
- ECE, EEE
- Type
- Hardware model
How it works
The ESP32 has Bluetooth built in and pairs with the phone like any other device. Each button in the phone app sends a short command. The ESP32 receives it and switches the matching relay, which works like a switch in the supply line of the appliance. After every action it sends the new on or off state back so the app always shows the true status.
What it does
- Four relay channels
- Phone app
- Status feedback
Main parts
ESP32, relay board
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY04Smart Dustbin with Automatic LidThe lid opens when a hand comes near and closes by itself, so nobody touches a dirty bin.
- AT-FY05Automatic Hand Sanitizer DispenserHold a hand under the nozzle and a small pump gives a measured amount of sanitizer without any contact.
- AT-FY06Automatic Plant Watering SystemA soil moisture sensor switches the pump on when the soil is dry and off when it is wet enough.
- AT-FY08Smart Parking AssistantGreen, yellow and red lights tell the driver how close the car is to the wall, with a buzzer at the stop point.