AT-BE15 · Arduino
Digital Weighing Scale
Weighs objects up to a few kilograms with a load cell and shows the weight on a display.
- Suits
- Sem 3–6
- Branches
- ECE, EEE, Mechatronics
- Type
- Hardware model
How it works
An object placed on the pan bends the load cell slightly, which changes its output by a very small amount. The HX711 module amplifies this and converts it to a number for the Arduino. A calibration factor, set once using a known weight, turns that number into grams for the display. The tare button sets the reading to zero with an empty container on the pan.
What it does
- Tare button
- Gram accuracy
- Calibration mode
Main parts
Arduino, load cell, HX711, LCD
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY04Smart Dustbin with Automatic LidThe lid opens when a hand comes near and closes by itself, so nobody touches a dirty bin.
- AT-FY05Automatic Hand Sanitizer DispenserHold a hand under the nozzle and a small pump gives a measured amount of sanitizer without any contact.
- AT-FY06Automatic Plant Watering SystemA soil moisture sensor switches the pump on when the soil is dry and off when it is wet enough.
- AT-FY08Smart Parking AssistantGreen, yellow and red lights tell the driver how close the car is to the wall, with a buzzer at the stop point.