AT-BE16 · Arduino
Ultrasonic Radar System
A sensor sweeps left to right on a servo and draws detected objects on a radar screen on the laptop.
- Suits
- Sem 3–6
- Branches
- ECE, EEE, Mechatronics
- Type
- Hardware model
How it works
The ultrasonic sensor sits on a servo motor that sweeps it from 0 to 180 degrees and back. At each angle the Arduino measures the distance and sends the angle and distance to the laptop over USB. A program on the laptop draws a green radar screen with a moving sweep line and marks every detected object in red at its correct position.
What it does
- 180 degree sweep
- Live radar display
- Distance and angle
Main parts
Arduino, ultrasonic sensor, servo
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY04Smart Dustbin with Automatic LidThe lid opens when a hand comes near and closes by itself, so nobody touches a dirty bin.
- AT-FY05Automatic Hand Sanitizer DispenserHold a hand under the nozzle and a small pump gives a measured amount of sanitizer without any contact.
- AT-FY06Automatic Plant Watering SystemA soil moisture sensor switches the pump on when the soil is dry and off when it is wet enough.
- AT-FY08Smart Parking AssistantGreen, yellow and red lights tell the driver how close the car is to the wall, with a buzzer at the stop point.